Features: <br> <br>Use normal USB flash drive as the medium for transfer design. <br>33pin floppy driver interface, 5V DC power supply, easy to install. <br>1.44MB built-in flash memory, with FAT12 format, used for cache data from USB flash drive. <br>1.44MB capacity of files in root directory or 999 folders can be searched. <br>Long file name and 4-level directory in 999 folders supported. <br>Jumpers with function for different machines. <br>100 disk image file supported. (used for machine with non FAT disk format, example for make boot disk). <br> <br>Floppy Driver: <br>Interface: 33pin floppy driver interface, 5V DC power supply port <br>Format of disk: 1.44MB 2HD Cylinders: 80 Tracks: 160 Sectors/Track: 18 Bytes/Sector: 512 Data <br>Transfer rate: 500 kbps <br>Encoding method: MFM <br>Panel: <br>8 segment numbers: Represent partitions number <br>Green LED: Status of read and write operation <br>USB port: Connect USB flash drive <br>Button: <br>When no USB flash drive plugged on emulator: <br>Left button used to rise ten-digit, right button used to rise single-digit, press 2 button together to rise hundred-digit, when the hundred-digit is 'b', the image mode used. <br>When an USB flash drive plugged on emulator: <br>Left button used to transfer data from built-in memory into USB flash drive, right button used to transfer data from USB flash drive into built-in memory. <br>Firmware version of emulator: <br>Keep pressed 2 button together, power on, 8 segment numbers will display firmware version and data of emulator to detect different model. <br>Error Code: <br>E0: No specified file in USB flash drive <br>E16: Built-in memory fault <br>Jumper Setting: <br>J5: --- <br>JA: Set to generate READY signal on 33pin of floppy driver interface <br>JC: --- <br>JB: --- <br>S0: Driver select 0 <br>S1: Driver select 1 <br>MO: Motor <br> <br>Specifications: <br>Model: SFR1M44-FU-DL <br>Compatibility: Suitable for embroidery machine with 1.44MB floppy drive <br>Voltage: 5V DC <br>Interface: USB port, 4 pin power plug, 33 pin plug <br>Housing material: ABS <br>Size (L x W x H): Approx. 122 x 102 x 25mm / 4.8 x 4.0 x 1.0inch <br>Color: Gray (Shown as the picture) <br>Package weight: 98g <br> <br>Package Included: <br>1 x USB Emulator1、Use normal USB flash drive as the medium for transfer design. <br>2、33pin floppy driver interface, 5V DC power supply, easy to install. <br>3、1.44MB built-in flash memory, with FAT12 format, used for cache data from USB flash drive. <br>4、1.44MB capacity of files in root directory or 999 folders can be searched. <br>5、Long file name and 4-level directory in 999 folders supported.