Staircase LED Controller Dual Sensor A/B UL1032 DC12V/24V Indoor Induction Light Controller

①. This product operates on low-voltage DC 12V-24V and must be connected to a switching power supply. Direct connection to 220V is prohibited, as it may cause damage to the controller. ②. The input port has polarity (positive and negative), and reverse connection is prohibited. Wiring operations should be performed when the power is off. After wiring is completed, check the correctness of installation and lighting connections before powering on. Incorrect DC voltage wiring or lighting installation may result in a short circuit, causing the controller to malfunction. ③. This product is suitable for use in a dry indoor environment. Strong wind, high temperature, or severe vibration may lead to sensor failure. ④. The sensing angle is 120 degrees, and the sensing distance is 1-3 meters. The sensor is most sensitive when facing people. ⑤. AB sensing heads should be arranged according to site settings. ⑥. If the AB sensors are triggered simultaneously within 6 seconds, the light strip runs inward from both ends. If the AB sensors are triggered continuously for more than 6 seconds, the light strip preferentially runs in the direction of the first triggered sensor. ⑦. Set the light time: Single, double, three, four, five. ⑧. If induction continues during the delay period, the light strip remains on, with the total time being from A to B plus the delay time. ⑨. Short circuit protection device: In a short circuit state, the status indicator light flashes. ⑩. Part name: Staircase LED controller; Product model: UL1032; Input voltage: DC12v/24V; Sensor head: 2 (A/B); Color: As Shown; Material: plastic. ⑪. Package Contents: 1 x LED driver, 2 x sensors, 2 x output lines. Only the above package content is included; other products are not included. ⑫. Light reflection and different displays may cause the color of the item in the picture to differ slightly from the real thing. The measurement allowed error is +/- 1-3cm.