Mesh Cover: Made of specialized single-layer metal mesh and ABS plastic, designed to accommodate various grass needle sizes. Product Material: Metal mesh features anti-rust surface treatment for durability and corrosion resistance; housing is constructed from ABS engineering plastic. Ergonomic Handle: Comfortable grip with moderate size and optimized handling feel. Power Requirement: Requires 2 AA batteries (not included). Enhanced Performance: Higher voltage enables better upright positioning of grass needles, especially longer ones. Wiring: Positive wire (short lead), negative wire (alligator clip). Usage Instructions: 1. Unscrew the mesh cover and fill the main container with grass needles (approx. 1/3 full). 2. Tighten the mesh cover securely—ensure the positive contact inside the container makes full contact with the metal mesh. 3. Apply white latex adhesive to the target surface. 4. Attach the negative clip (with plastic sleeve) near the planting area. 5. Position the mesh cover (grass exit side) 3–5 cm above the desired planting spot. 6. Turn the power switch to “ON”, then press the central oval button to activate (metal mesh carries 5000V DC—do not touch during operation). 7. Release the button to stop operation; indicator light will turn off. Color: As shown in image. Material: ABS. Package Includes: 1 × Solar Panel Grass Planter 1 × Brush 1 × Pack of Valley Dark Green Grass Needles 1 × Pack of Wild East Green Grass Needles Note: Color may vary slightly due to screen settings and lighting conditions. Slight measurement variance possible.