Universal PIC Programmer Adapter Seat for ICD2 and PICKit Series

High quality PICKIT3 Programmer USB (12 Mbits/s interface to host PC), real-time execution, MPLAB IDE compatible (free copy included) The MPLAB PICkit 3 enables debugging and programming of PIC and dsPIC Flash microcontrollers using the graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 connects to a PC via USB and connects to the target device via an in-circuit debug (RJ-11) connector (compatible with MPLAB ICD 2, MPLAB ICD 3, and MPLAB REAL ICE). Supports low-voltage operation from 2.0 V to 6.0 V Diagnostic LEDs (power, busy, error) Read/write program and data memory of microcontroller Erase and verify program memory Freeze peripherals at breakpoint Program up to 512K flash memory with Programmer-to-Go functionality Instructions for use: For 28-pin and 40-pin microcontrollers: align left, use flag line 28/40P (A), shorting cap on position A For 8-pin, 14-pin, 18-pin, and 20-pin microcontrollers: align left, use flag line 8P/14P/18P/20P (B), shorting cap on position B ICD2, KIT2, KIT3 crystal head or 6-pin block programming connection is used for programming operations Supported microcontrollers: PIC16/18XX 40-pin series devices (except 16F59) PIC16/18XX 28-pin series devices (except 16F57) PIC16/18XX 18-pin series devices PIC 8-pin/14-pin/20-pin family devices (except 10FXX) Color: Red Material: Plastic Size: 14.5 x 7 x 4 cm Package Contents: 1 x PICKIT3 Programmer 1 x USB Cable 1 x 6-Pin Cable 1 x Universal Programmer Socket Note: Lighting conditions and display settings may cause slight color variation between the image and the actual product. Measurement tolerance: ±1–3 cm.