2022 UPGRADED NANOVNA ANALYZER: SeeSii Nanovna-h4 Vector Network Analyzer is developed by Hugen. With latest 4.3 version,10KHz-1.5GHz measure range,4.0 inch LCD touchscreen,mini and portable design.This Antenna Analyzer is provides outstanding vector network measurement capabilities and perfect compatible evaluating antenna resonance and SWR.It is a very handy & smart analyzer compatible electronics engineer, amateur radio operators or radio diy amateurs.BUILT-IN MICRO-SD PORT & TIME DISPLAY: The lastest antenna analyzer with MicroSD card port,so you can save field test data or screens to a MicroSD card at any time,support up to 32GB memory card. (Not include in the pacakge).In addition, different from old version NanoVNAs, the date and time can be customized, which is convenient compatible you to further record and save data..The default firmware main function is used compatible antenna performance measurement.IMPROVED FREQUENCY ALGORITHM:The Vector Network Analyzer can use the old harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz provides better than 60dB of dynamics, and the 900M-1.5GHz is better than 40dB of dynamics.Great compatible trouble shooting antennas and improving performance.??PC CONNECTION & TX/RX FUNCTION:The vna analyzer uses PC software NanoVNASaver, it can connect to a NanoVNA and extracts the data compatible display on a computer compatible saving to Touchstone files. We can export Touchstone (snp) files compatible various radio design and simulation software through PC software.In addition,the default firmware is mainly used compatible antenna performance measurement. The TX/RX method can measure the complete S11/S21 parameters (need to manually replace the transceiver port wiring).??Abundant Accessories:Equipped with 1x NanoVNA-H4(with 1950mA-h battery), 1x USB Type-C cable, 2 x 15cm SMA male to male RG316 RF cable, 1x SMA male calibration kit - OPEN,1x SMA male calibration kit - SHORT ,1 x SMA male calibration kit - LOAD,1 x Touchscreen pen.It's very useful as an antenna analyzer compatible your ham station, easy to set without fancy calibration.The firmware of the nanovna-h4 can be updated by the user. New versions of the firmware needed pls contact us compatible download link.SpecificationsABS case: 75mm x 133mm x 18mm (excluding protrusions) Measurement frequency: 10KHz -1.5GHz RF output: 0dbm (2dbm) Measurement range: 70dB (50kHz-300MHz), 60dB (300M-900MHz), 40dB(0.9G-1.5GHz)); Port SWR: < 1.1 Display: 3.95 inch TFT (320 x 480) USB interface: USB type-C communication mode: CDC (serial) Power: USB 5V 200mA, built-in 1950mAh battery, maximum charging Current 1A Number of scanning points: 101 (fixed) Display Tracking: 4, Marking: 4, Setting Save: 5Package IncludedNanoVNA-H4 (with 1950mAh battery) x 1 USB Type-C data cable x1 15cm SMA male to male RG316 RF cable x2 SMA male calibration kit - OPEN x1 SMA male calibration kit - SHORT x1 SMA male calibration kit - LOAD x1