Features 1、10Gbps: There are 1 uplink port and 4 downstream ports, both supporting 10Gbps USB 3.1 Gen 2 operation. Downstream ports can support any combination of SuperSpeed Plus (10Gbps), SuperSpeed (5Gbps), High Speed (480Mbps), Full Speed (12Mbps) and Low Speed (1.5Mbps) devices. 2、Interface: 4 x USB3.1 TYPE A media interface, which provides higher bandwidth and performance when using multiple full speed devices simultaneously. 3、Support Systems: Front Panel Hub support for Windows, for OS X and Various for Linux Kernels Run Under the Kernel Without Additional Drivers. 4、Wide Compatibility: The USB front panel is compatible with non x86 devices and platforms that support USB hub functionality, such as smartphones, tablets and set top boxes. It is perfect for all USB hub applications. 5、Aluminum Alloy: The shell is made of aluminum alloy, which is wear resistant and durable, and can be used for a long time. Specification Item Type: USB 3.1 Front Panel Hub 4 Ports Material: Aluminum Alloy Transmission Protocol: USB 3.1 Gen 2 Media Interface: 4 x USB3.1 TYPE A Transfer Rate: 10Gbps (SuperSpeed Plus) Specification Compliant: Universal Serial Bus 3.1 Compliant, SuperSpeed Plus USB (USB 3.1 Gen 2) USB Type C 1.0 Rev 1.2: Compliant Simultaneous Operation of Any Combination of SuperSpeed Plus, SuperSpeed, High Speed, Full Speed, and Low Speed Devices: Supported USB Power Saving Features: Supports USB Power Saving Features Such As Link Power Management, Ux State, Selective Suspend, and Functional Suspend CMOS Process: Internal USB PHY Uses Advanced CMOS Process for Low Power Consumption Port Combinations Supported: Supports Any Combination of Single or Combined Mode Overcurrents for All Ports Input: 3.3V and 1.05V Input Required Battery Charging Contour: Supports USB Battery Charging Contour v1.2 (SDP, CDP, DCP) Charging Modes: Supports Vendor Specific Charging Modes, Various Brands of Mobile Phones Independent Charging: Supports Independent Charging when the System is Suspended, Powered Off, or Disconnected DFP Combination: Any DFP Combination Can Be Configured to Support USB Battery Charging Operating System: For Windows, for OS X and Various for Linux Kernels Run Under the Kernel Without Additional Drivers Available Devices: Compatible with non x86 Devices and Platforms That Support USB Hub Functionality, Such As Smartphones, Tablets, and Set Top Boxes. It is ideal for all USB hub Applications Such As: Standalone USB Hubs, Notebook, Ultrabook Docking Stations, Port Replicators, Desktop PC Front Panels, Motherboard Onboard Hubs and USB Hub Combo Devices. Package List 1 x Hub 1 x Data Cable 1 x Power Cord