1. Full status information (Present, Not present, Intermittent) 2. You can print, save, or copy fault codes to other applications. From the fault codes window, access the measuring blocks window directly. 3. The program displays measuring block information for multiple control modules, allowing user selection from a list. 4. The program supports displaying up to 8 measuring block parameters simultaneously. Sample rate depends on the communication protocol. Older systems, such as -B X 25 DT Engine (ISO-9141-2), may have slower communication, while newer systems like Multec or Bosch units (using KWP-2000) are faster, and the latest CAN-based control units offer high-speed performance. Output tests can be performed on various controllers. Note: For optimal use with the latest Opcom software: 1. Connect the USB dongle before opening the software. 2. The software supports vehicles up to model year 2021. 3. Supported language: English. 4. Firmware version: V1.95, supports flash updates. 5. Compatible with Windows 7, 32-bit and 64-bit systems. Warm Tips: 1. If the CD is damaged or unreadable, contact the seller for a software download link. Please do not open a dispute or leave negative feedback. 2. Disconnect the internet and close the software during installation and use. 3. The 2021 USB dongle is only compatible with upgradable Opcom V1.95 firmware. Note: Slight variations in color and appearance may occur due to different lighting conditions, camera angles, and screen displays. These differences do not affect normal operation. Color: Black Material: ABS Package Contents: 1 x Opcom V1.95 2021 Diagnostic Tool Note: Light reflection and display settings may cause slight color differences between the image and the actual item. Measurement error allowance: +/- 1-3 cm.