Features: - Platform Cable USB, a USB-compatible cable for in-circuit configuration and programming of all Xilinx devices. - Derives all operating power from the USB hub port controller; no external power supply required. - Supports sustained slave-serial FPGA configuration transfer rates up to 24 Mbps in a Hi-Speed USB environment. - Based on CY7C68013A and XC2C256 components; fully compatible with Xilinx Platform Cable USB specifications. - Supports all Xilinx devices for FPGA configuration and PROM/CPLD programming. - Supports JTAG, Slave-Serial, and SPI interfaces. - Interfaces with devices operating at 5V (TTL), 3.3V (LVCMOS), 2.5V, 1.8V, and 1.5V. - Selectable target clock frequency with software-supported automatic frequency adjustment. - Compatible with Windows and Red Hat Enterprise Linux operating systems. - Automatically senses and adapts to target I/O voltage. - Target clock speeds selectable from 750 kHz to 24 MHz. Specifications: - Dimensions: Approx. 110 × 50 × 20 mm (4.33 × 1.97 × 0.79 in) - Model: DLC9LP - Power: 5 V, 0.07 A - Supported Software: Xilinx ISE 8.1 through ISE 14.7, Xilinx Vivado, IMPACT, ChipScope, and MicroBlaze embedded processor debugging tools - Supported Devices: All Xilinx devices including Virtex and Spartan FPGA families; XC9500, XC9500XL, XC9500XV CPLDs; CoolRunner-XPLA3 and CoolRunner-II CPLDs; XC18V00 ISP PROMs; Platform Flash XCF00S, XCF00P, and XL PROMs; XC4000 series FPGAs; and newer devices including Virtex-7 and Zynq-7000 families. Package Includes: - 1 × Platform Cable USB - 1 × JTAG adapter - 1 × USB 2.0 cable - 1 × 8-pin to 7-pin separated ribbon cable - 1 × 14-pin (2.5 mm pitch) JTAG flat cable - 1 × 14-pin (2 mm pitch) JTAG flat cable - 1 × 10-pin (2.5 mm pitch) JTAG flat cable