1、Deauther Watch is still an ESP8266 development board, but you can wear it like a smartwatch. 2、This ESP8266 development board comes with a 500mAh battery, OLED display and a momentary slide switch. 3、Only 80mAh power usage, up to around 3-4 hours work time. 4、Protections: short, overcharging, over discharging, temperaturet. 5、It comes installed with the latest ESP8266 Deauther software. 6、With this software, you can perform different attacks to test WiFi networks. 7、Please note that the ESP8266 does only support 2.4GHz. 8、You can also use it to develop your own software. 9、It is simple to use, just like any other ESP8266 development board. Specifications: Material: ABS Color: white+black Battery: 1 * 3.7V, 500mah battery (included) 3D Printcase: YES Screenprotection: No Battery indicate: No Power switch: Plastics Charge current: 0.5A Work Time: 3-4h Deauther Attack: Disconnect 2.4G WiFi Deauther Beacon: Create fake-networks Deauther Probe: Confuse wifi trackers Packet Monitor: Display wifi traffic GPIOs and Hardware info: Display: SH1106 1.3" OLED Display SDA: GPIO 5 Display SCL/SCK: GPIO 4 WS2812b LED: GPIO 15 Button Up: GPIO 12 Button Down: GPIO 13 Button Selects: GPIO 14 Laser: GPIO 16 Side Button: RST What makes it special? Only 80mAh power usage 500mAh recharging current Wood cover and 3D print case Indicate recharging LED (RED will turn off when full) ESP12F Inside Power Switch Protections: short, overcharging, over discharging, temperature Disclaimer This project is a proof of concept for testing and educational purposes. Neither the ESP8266, nor its SDK was meant or built for such purposes. Bugs can occur! Use it only against your own networks and devices! Please check the legal regulations in your country before using it. We don't take any responsibility for what you do with this program. More Info Deauth Closes the connection of WiFi devices by sending deauthentication frames to access points and client devices you selected. This is only possible because a lot of devices don't use the 802.11w-2009 standard that offers a p-rotection against this attack. Please only selects one target! When you selecting multiple targets that run on different channels and starts the attack, it will quickly switch between those channels and you have no chance to reconnect to the access point that hosts this web interface. Beacon Beacon packets are used to advertise access points. By continuously sending beacon packets out, it will looks like you created new WiFi networks. You can specify the network names under SSIDs. Probe Probe requests are sent by client devices to ask if a known network is nearby. Use this attack to confuse WiFi trackers by asking for networks that you specified in the SSID list. It's unlikely you will see any impact by this attack with your home network. Videos Software 2.6.0 Introduction How to install antenna of deauther watch How to increase the maximum effect of antenna How to connect smartphone DSTIKE Deauther Watch Demo NTP Time server functions Item size: 48 * 39 * 17mm / 1.89 * 1.54 * 0.67in Item weight: 50g / 1.76ounce Package size: 80 * 80 * 30mm / 3.15 * 3.15 * 1.18in Package weight: 80g / 2.82ounce 1 * Development Board with Watchband